UHU Plast Spezial 30g - Fine Metal Tip for Model Building
UHU Plast Spezial is a specialist adhesive designed for bonding polystyrene parts and a variety of other plastics in model building. Its fine metal nozzle enables economical and precise adhesive application, even in hard-to-reach areas. This thin adhesive forms a tough, clear adhesive film for strong, durable bonds.
Key Applications:
- Polystyrene and impact-resistant polystyrene types (ABS, SAN, SB, ASA)
- Polyvinyl chloride (PVC) hard and soft
- Plexiglas® (PMMA)
- Celluloid®
- Cellulose esters (CN, CAB)
- Polycarbonate (PC)
- Wood, paper and cardboard (in combination with the above-mentioned plastics)
Not suitable for:
- Polyamide (PA)
- Acetal resin (POM)
- Polyethylene (PE)
- Polypropylene (PP)
- Polytetrafluoroethylene (PTFE)
- Silicone (Si)
- Expanded polystyrene (will be attacked)
Outstanding Features:
- Forms a strong but flexible bond with thermoplastic properties
- Temperature resistant between -30°C to +90°C and waterproof, resistant to oil and alcohol
- High final strength: Plexiglas 3.0 N/mm², Polystyrene 3.4 N/mm², Hard PVC 4.3 N/mm², Polycarbonate 4.5 N/mm², ABS 6.5 N/mm² Material failure
Simple Preparation:
Personal Safety: UHU Plast Spezial contains volatile and flammable solvents. You should therefore take appropriate safety precautions when handling and storing the adhesive.
Surface Requirements: The surfaces to be bonded must be dry, clean and free of dust, oil and grease.
Tools: Equipped with a fine, needle-shaped nozzle for precise application and to reach hard-to-reach areas.
Precise Processing:
Instructions for use:
Apply the adhesive, depending on the requirements, to one or both of the materials to be bonded and join them together immediately. Initial adhesion is achieved after 5-10 minutes. A high final strength of UHU Plast Spezial is achieved by dissolving the plastic surface. For this reason, the adhesive should only be applied in small amounts to thin-walled plastics.
Stains/residues: Smeared adhesive and stains can be removed with acetone or thinner for nitrocellulose lacquer. Test on a hidden area beforehand.
Technical Specifications:
- Base: Polyacrylate
- Chemical resistance: Water, fats, oils, alcohol
- Color: Transparent
- Consistency: Very low viscosity (thin)
- Density approx.: 0.88 g/cm³
- Final strength: 3-7 N/mm² depending on the type of plastics bonded together
- Final strength after: 24 h
- Minimum temperature resistance: -30°C
- Maximum temperature resistance: 90°C
- Moisture resistance: Good
- Solvent: Mixture of esters and ketones
- Viscosity: Liquid
- Viscosity approx.: 50 mPa·s
- Water resistance: Very good
Physiological Properties:
The dried adhesive is stable, completely neutral and physiologically harmless.
Package Sizes:
- Plast Spezial Plastic bottle with dispensing nozzle 30 g
UHU Plast Spezial is a must-have for any serious model builder! This adhesive offers exceptional performance, precision, and durability, ensuring your creations stand the test of time.
On warehouse (LT): 5+
On warehouse (EE): 5+
Article: UH458800
Delivery time: 1-4 darba dienas
Rīga
- Domina 1 pc.
- Akropole Alfa 4 pc.
- Akropole Rīga 4 pc.
- Ieriķu iela 2a-1 5+ pc.
- Sāga 1 pc.
Tukums
- Tukums, Pils iela 9 2 pc.
Liepāja
- Liepāja, Peldu iela 4 3 pc.
Valmiera
- Valmiera, Rīgas iela 30 2 pc.